Lark FTIR Windows & Accessories Leave a comment

Mxrady offers the LARK IR windows in various measurements made of different materials. Our IR windows are utilized in FTIR spectroscopy just as in warm imaging frameworks (FLIR) and different fields of use.

The item range incorporates uncoated optically cleaned round and rectangular windows (undrilled and penetrated) made of the accompanying materials. Snap-on the window material of interest for additional data about measurements, shapes, and costs. You get easily get IR windows at Mxrady LARK brand.

AgBr (Silver bromide) – AgBr is insoluble in water, the solvent in acids, and assaults base metals. It is delicate to mechanical shock, scratches effectively, and will cold stream. Will in general obscure when presented to bright (UV) radiation.

AgCl (Silver chloride) – AgCl is insoluble in water and somewhat dissolvable in sodium hydroxide and some amino acids. Not suggested for use at temperatures over 200 °C. It will darken when presented with bright (UV) radiation.

BaF2 (Barium fluoride) – BaF2 is insoluble in water and dissolvable in acids. It has a more extensive phantom reach. It is a generally hard material and touchy to mechanical and warm shock.

CaF2 (Calcium fluoride) – CaF2 is insoluble in water and opposes most acids and salts. It is dissolvable in ammonium salts. Because of its high mechanical strength, it is especially helpful for high strain applications.

CsI (Caesium iodide) – CsI is solvent in water and liquor and somewhat harmful. It has high protection from shock. It is a delicate, hard-to-clean material. CsI is hygroscopic.

KBr (Potassium bromide) – KBr is solvent in water and liquor and marginally dissolvable in ether. It is genuinely safe against warm and mechanical shock. KBr is hygroscopic.

KCl (Potassium chloride) – KCl is less solvent than NaCl. It has a lengthy transmission reach and lower reflection misfortunes. KCl is hygroscopic.

KRS-5 (Thallium bromoiodide) – KRS-5 is insoluble in acids, somewhat solvent in water, and dissolvable in bases. Due to its great transmission range, it is great for ATR applications. The delicate material will twist without any problem. It is profoundly harmful and not hygroscopic.

MgF2 (Magnesium fluoride) – MgF2 is practically insoluble in water. It is a hard material and is straightforward from the VUV to the MIR phantom reach. Not suggested for use at temperatures over 500 °C.

NaCl (Sodium chloride) – NaCl is somewhat dissolvable in liquor and solvent in water and glycerine. It is fairly impervious to mechanical and warm shock.

SiO2 (Fused Silica) – Infrared grade SiO2 is insoluble in water and marginally solvent in bases. Its transmission stretches out close to the infrared district.

ZnS (Zinc sulfide) – ZnS is insoluble in water, typical acids, and bases and responds with solid oxidizing specialists. It has decent protection from mechanical and warm shock.

ZnSe (Zinc selenide) – ZnSe is insoluble in water and marginally dissolvable in acids. It has high protection from compound assault. Natural solvents, weak acids, and bases have no impact on the material. It is great for ATR applications because of its low assimilation in the infrared locale.

Consult MxRady  for any requirement for FTIR windows or cells.

Leave a Reply

Your email address will not be published. Required fields are marked *